ATI Paragon II Monitor

Mixer Details

This is just one of over 75 professional audio mixers covered in The Mixer Output Guide, which describes direct outs, inserts, hidden mods and more. To see the rest, and for definitions, visit The Guide.

Make: 
ATI
Model: 
Paragon II Monitor
Direct Out: 
1/4" balanced TRS
Insert: 
Separate send and return on 1/4" balanced TRS
Gain Control of Direct Output: 
yes
Notes: 

Dedicated knob for direct out level on each channel.

From the manual: "The signal source for the Direct Output can be jumper selected from a number of points. These include Post Filters, Post EQ/ Insert, Post VCA
and Post Fader. The PRE switch allows the PCB jumper selected signals to be front panel selected. See Appendix-1 for more jumper information and standard settings."

From manual, page 2-8:
"Direct Output Pre & Post Options:

Pre
The Direct Out Pre signal can be selected to be either post Filter or post EQ & Insert. This is done by moving the jumper at location P4. The jumper is shown and comes standard from the factory in the post Filter location.

Post
The Direct Out Post signal can be selected to be either post VCA or post Fader. This is done by moving the jumper at location P3. The jumper is shown and comes standard from the factory in the post Fader location. Note that the Fader signal is selected by the Pre2 jumper described on the next page."

This mixer has been reported to weigh 780 lbs in the case.

Price It: 
Price It
Syndicate content
Printer-friendly versionPrinter-friendly version